DNKa’ Gel Paint Ethno Black

DNKa’ Gel Paint Ethno

Decorative Gel Paint — Alta Pigment, Thick Consistencia, No Sticky Layer

The gel paint colección consists of 3 highly pigmented dense tonos sin a residual sticky layer:

– White – media thickness

– Black – thick

– Red – media thickness

This colección allows you to create thin, color-saturated design elements such as geometry, scrolls, ethnic ornaments, pincel strokes, stamping, y any other creative ideas.

The gel paint can be applied under the top coat o on top of the finished top coat, which makes it possible to achieve a subtle textured effect on the uña superficie.

– Does not run, holds pincel strokes y lines, allowing work on several uñas simultaneously.

– Not apto para creating volumetric, relief elements.

– In ultra-thin, semi-transparente layers (such as “fingerprint” design), a top coat is required para sealing.

– To adjust the consistencia of the black paint to a media thickness, it can be mixed con a small amount of Ultra Black Gel Polish.

– This is an alkaline-based cuticle remover used to quickly soften y effectively remove dead skin around the uña plate. Alkaline removers are more powerful than acid o urea-based products, so they are used con proper exposure time y mandatory neutralization.

Main purpose of the product:

Softening the cuticle para subsequent removal during a manicure (trimmed, combined o hardware).

Suitable para professional use, as it acts quickly.

Recommendations para use:

– Apply the product in a capa fina on the cuticle.

– Leave on the skin para up to 1 minute

– Carefully push back the cuticle con a pusher o orange stick, y treat the skin con the necessary tool.

– Thoroughly rinse off any remaining product con water to neutralize the alkali.

– Apply moisturizer o cuticle oil to prevent skin from drying out.

If you want to create a design under the top coat:

– Remove the sticky layer from the gel polish coating using Nail Prep & Cleanser 3-in-1.

– Apply the chosen pattern con Ethno Gel Paints, then polymerize in an LED/UV lámpara 48/36 W para 120/180 segundos.

– Seal the finished design con the selected DNKa’ Top, polymerizing para the time recomendado para that specific top.

If you want to work on the finished superficie:

– Cover the gel polish con your chosen DNKa’ Top y polymerize according to the instructions para that top.

– Using Ethno Gel Paints y DNKa’ brushes #001, #002, #003, create the desired design.

– Polymerize in an LED/UV lámpara 48/36 W para 120/180 segundos.

Retirada:
File off.